Guidelines For Storing Oil In Flexitanks
If you are into oil business, then it is apparent that you require storing of oil. Flexitanks are the ideal solutions when it comes to storage of oils. Flexitanks offer an effective storage solution for oils. The flexitanks can be manufactured quite quickly than any other oil storage facilities. In recent times, the flexitanks are a rapidly deployable and relatively inexpensive asset for storing oils as well as other types of fluid. But at the time of turning to flexitanks for storage of oils, there are few major considerations to keep in mind that are as listed below.
Chemical Compatibility
The first thing to consider while selecting flexitanks for oil storage is the chemical compatibility. The material used in the manufacturing the flexitanks should not react with the stored oil in it. Usually, PVC or PU coatings are used for storing of oils so that is appropriately compatible so that there are no problems while storing.
Capacity of Storage
The capacity of storage of the flexitanks is one of the major points to consider. The larger is the storage capacity, the greater would be the weight of the technical textile that is required. In addition to this, a flexitank whose size is greater have a much higher coating adhesion along with a greater tensile strength for appropriately withstanding the weight of the oil inside. It is to be kept in mind that loading a flexitank above its rated capacity might result in failure of the container itself. Thus, the capacity of storage of the flexitanks is a matter of immense importance that needs to be considered at the time of buying.
Protection from Leaks
If a flexitank breaks or spill oil, the expenses of cleaning up the spill can be far more than the worth of the lost oil itself. Oil spills can also result in critical human injury and natural harm. Therefore, it is critical to take precautions to minimize and contain leaks when using a flexitank to store oil. As a thumb rule, control around the flexitank can be set up utilizing a spill embankment covering beneath and around the flexitank. On the other hand, the option to put the flexitank on top of a dribble plate to contain little leaks is also an ideal solution. Always load and unload a flexitank inside a spill containment area and ensure that the bladder is not leaking.
Usage Specifications and Installation
It is extremely important to consider the usage specifications as well as the installation procedure for avoidance of leakages and ensuring reliable performance. Improper usage of flexitanks can lead to structural weakness, leaks, and other problems. Moreover, the flexitanks should be placed on smooth surfaces for prevention of any kinds of leaks and punctures. Care needs to be taken that no localized pressure points occur which may affect the flexitanks’ integrity during long term storage. Considering these important points would make sure that the flexitanks for storing oils is appropriately chosen and the best results can be obtained.
Temperature Compatibility of Flexitank for Oil storage
Oil and its sedimentary products have a low freezing point between 20°C to 65°C, resulting it requirement of heating it for discharge when it arrives at it is stored. The incorporated integrated heating system of flexitank makes it conceivable to warm the oil for discharge without the need of additional heating pad. It is because of this reason installation of such system or manufacturing flexitank to suit oil’s temperature compatibility is extremely important.
These are some of the important guidelines that should be kept in mind when purchasing or ordering a flexitank to a manufacturer. This would ensure a long lasting essence for the stored oil; keep it safe from any hazard.
