Archive for category: Flexitanks

Flexitank is a bulk liquid container made of numerous layers of polyethylene with an outer covering of woven polypropylene with volume from 12 up to 26 thousand liters, for shipping of any non hazardous liquids. It can convert a 20ft container from a dry goods carrier to a liquid carrier. Flexitanks are made using custom formulated blended polyethylene making it a highly environmental-friendly packaging medium. Flexitanks offer a flexible, dynamic, cost effective and safe solution for all bulk liquid transport requirements.

How long does it take to fill a flexitank?

Installation of Flexitank in the container takes 20 to 30 minutes, when that it is prepared for filling the liquid product it takes another 30-40 minutes.

Advantages of using Flexitank

• Cost effective and significantly cheaper than tank containers
• No cleaning cost, no disposal costs
• Low labor for filling, handling and loading
• Very low positioning costs
• Door to door delivery
• Faster loading
• Lower product loss for unloading
• No necessity for forklift to load or unload container
• No necessity for intermediate bulk storage
• Available in remote areas
• No risk of contamination
• Recyclable, clean and environment friendly
• Maximized payload due to lightweight
• No return loads required
• No delays because of obtaining bulk tanks

Know more: www.fluidflexitanks.com/advantages-of-using-flexitanks

Some tips from Flexitank Manufacturer on how to install a flexitank:

• Inspect and clean the container cautiously
• Place corrugated paper on the inner side walls and the floor then fix with tapes
• Place flexitank in a container and unfold flexitank. Unfold the face with valve totally to the outside, then fold to within in a certain dimension to make it perpendicular to the channel of the container door
• Place steel bar. Put the hard paper pipes on the lockhole, and fix with tape. Pipes can be cut short when required. Make sure the smooth side of cardboard face to inside container and use quick fastening straps to fix it onto steel bars.
• Fix bulkhead
• Close the left door and attach caution label
• Start loading
• Finish loading, close valve and fasten sock, close the other side

Related Topic: Recommendations Before Installing The Flexitanks

Installation of the flexibag in the container can take about half an hour and loading the liquid cargo might take 40 -50 minutes based on the product. The flexitank containers can be shipped by road, rail and sea, but, not all bags are accepted on the rail.

Related: Installation Guide for Heater Pads for Flexitanks

Flexitank is basically a large size liquid container which is used for transporting liquids that are safe to carry from one place to another. Flexitank is made up of many layers of polyethylene. The outer part of the liquid container is covered with polypropylene. Flexitank is placed in the ocean container. The shippers which transport liquid products in a large amount find it very useful, as it turns out to be affordable and safe. The packaging of the flexitank is done in an enviro-friendly manner and it is used at a time. If you want to transport liquid products in bulk, then you should make use of flexitank from a reputed manufacturing company which manufactures high-quality flexitanks. It is recommended to all people to use flexitanks for bulk liquid transportation.

Benefits of Flexitanks

* If you use traditional bulky liquid containers for transporting liquid products, then you might have to break a bank. But, flexitanks are not at all expensive. The cost-effective quality of a flexitank helps the users to use the flexitank conveniently.

* The liquid products do not get damaged because of the layers used for covering the liquid container. The multi-layer protection prevents flexitanks from getting affected.

* The liquid products will not get contaminated because the user can use a flexitank only once.

* Flexitanks help you transport non-toxic liquid chemicals, pharmaceutical liquid items and liquid-based food items such as beverages, wine and edible oil.

* Flexitanks offer minimum use of labour, as it has no loading and unloading hassle and it can be handled in a convenient manner.

* You do not have to spend additional cost on the cleaning part. The bags in the flexitank are designed to throw away after the use.

* Flexitanks can be disposed which make the liquid container earth-friendly.

Loading and Unloading of Material

Flexitank is placed in a container which is approximately 20 foot. It takes around 15 minutes to install the container. After the installation, the supply hose gets fixed and an electric pump is placed in order to have a good supply of liquid. The loading process gets completed within 30 minutes. After the loading, the container can be transported with ease. Flexitanks have the requisite tools which are required for transporting various types of loading. A variety of nozzles and adapters help load and unload equipment. Steam and electricity are used for heating the load prior the unloading process. If needed, one can use a protective layer which will safeguard the load from unfavourable temperature at the time of unloading.

Related topic: What Can Be Transported In Flexitanks And Its Benefits?

How Does It Reduce Transportation Cost?

1. Flexitanks designed by us can collect a large quantity of liquid cargo as compared to the traditional drums. This helps minimize the freight costs.
2. The operational charges get automatically reduced by allowing the customers load more than 20 foot container.
3. Labour charges are extremely low because of the faster loading process. The smart designs of our flexitank make the loading convenient for customers.
4. The flexitanks of our company have a quick absorbent quality. Moreover, the flexitanks of our company are environmentally friendly.
5. Our flexitanks let you have a bulk logistic solution because of the easy handling process. The requirement of less labour will bring down the logistic expense naturally.

Fluid Flexitanks – The Best Flexitank Manufacturer

What makes our flexitank best among the rest? Read through to find out.

• Our flexitanks last long, as they are constructed with multi-ply polyethylene which helps withstand corrosion.
•  Our flexitanks can be availed at a budget-friendly price.
• The absorbent quality makes our flexitank endure any rough condition.
•  Our flexitanks fulfil the requirements and meet the standard of the US Federal Drug Administration.
• No extra charges are needed for cleaning because all our flexitanks are highly hygienic.

Read more: www.fluidflexitanks.com/why-fluid-flexitanks-for-bulk-liquid-transportation

Get in touch with the leading flexitank manufacturer to get top quality flexitanks at a rate which does not burn your pocket.

Since 2005 the biodiesel industry has seen outstanding growth along with rise in feedstock prices and increase in global competition. But with competition comes need to look towards newer technologies to enhance supply chains and lessen costs.

Flexitanks is one such solution that is ideal and should be looked into by players in the biodiesel industry.

Although flexitanks are not a ‘new’ technology but in recent years they have gained great momentum as bulk liquid transport method.

These are as the name suggest flexible, collapsible soft bladders that fit inside the standard 20ft container on being filled.

The advantages flexitanks has in concern of biodiesel manufacturers are:

• Flexitank is a cost efficient method. From the raw materials to the end products all can be transported with use of flexitanks in case of biodiesel. Potential cost efficiency is doubled.
• On installation fexitanks products can be loaded utilising connecting hose and pump (90mins- 2hrs) and promptly sent for transport. Similarly cargo can be discharged at destination. Transhipment, cleaning and storage are unnecessary due to one-time use nature of flexitanks. Supply chain is hence shortened, overall cost decreased and shipment reaches quicker.
• Shorter supply chains mean less risk
• Flexitanks are 100% recyclable.
• Flexitanks help to limit exposure to volatility of market and combat price fluctuation risks. Small quantity feedstock orders mean improved quality and less accumulation thus lowering risk of quality downgrade.
• Smaller end product shipment through flexitanks also indicate reachability to more customers and hence larger and diverse customer base (spreading out of risks). This means better turnover rates and more manufacturer control on cashflow with less dependence on finances.
• Flexibility of flexitanks is advantageous in sourcing feedstock from all around the world, with simultaneous ease in global transport of end product. They can be transported by sea, rail or road.
• The ready availability of flexitanks are a huge plus point in comparison to ISO Tanks that are limited.
• They are easy to set out and hence manufacturers may order feedstock according to need without involving need for storage and stocking.
• In equal measure manufacturers can respond quickly to customer’s demand for end product.

For more details call: +91 8221-229400

Wine is one of the most precious, and equally as delicate, products to transport. It needs thorough care in packaging and constant monitoring en route to make sure that it reaches its final owner just as the winemaker desired it to!

No matter how logistically challenging it is to take wine across shores, the market for imported wines from distant lands has remained strong for more than a century. The methods of transportation, however, have evolved and there is now a tremendous shift towards using flexitanks for wine transport. Flexitanks are being preferred as these allow transporting wine in the best state and lowest costs possible.

Let’s take a look at the three types of wine transportation.

Bottle Transport

To give the wine a safe, uneventful journey, transporters chose to ship bottled wines instead of in bulk containers. Although bottle transportation made it fairly easy to ensure that no contamination occurred on the way and that the wine was ready to into the racks right after reaching the final shore, shipping was a considerably expensive process.

Why Bottle Transport?

Because the weight of the bottles themselves made a substantial chunk of cargo. In addition, the bottles were prone to breakage and needed additional packaging material to prevent it. The weight and volume of the bottles restricted the amount of wine that could be transported per ship.

To make good these shortcomings of the bottle transport method, the industry has been radically shifting to bulk transport instead of shipping bottles.

Bulk transport method is of two types depending on the type of container used.

• ISO Tanks

ISO tanks are hollow steel tanks. They can be put directly on a train, truck or ship and are reusable. Besides wine, ISO tanks are also used for transporting other materials. A typical ISO tank has a capacity of holding up to 26,000 liters of wine.

• Flexitanks

Using flexitanks for wine transport is the latest and most preferred method among manufacturers. Flexitanks are usually disposable, flexible bags that are put into standard shipping containers for transportation.

Flexitanks for wine transport facilitates the transportation of almost three times as much wine as bottle transport. While a standard shipping container holds about 12,000 wine bottles, a flexitank holds the equivalent of 32,000 wine bottles. This makes it a much more ecologically conscious transportation method than bottle transport, in addition to bringing about a dramatic cost reduction. And the biggest advantage of flexitanks over ISO tanks for wine transport is that the contamination risk is significantly lower in the former.

Take a look at the advantages: https://fluidflexitanks.com/advantages-of-shipping-with-flexitanks/

The typical volume of a flexitank is about 25,000 liters. They are safe to transport via ship, train or truck. A reliably manufactured flexitank is nearly 100% effective in preventing oxidation, thereby preventing premature ageing of wine.

The most common material used for making flexitanks in the current day is polyethylene with ethylene vinyl alcohol (EVOH) used as a barrier material. EVOH keeps the wine from getting in contact with any organic material thereby preserving its original color.

Read more: Why Flexitanks for Transporting Liquids?

Fluid flexitanks are undoubtedly the winner of the wine logistics industry. They have an excellent capacity, offer superior protection against oxidation and contamination and can easily be loaded and unloaded from one medium of transport to another. Rishi FIBC fluid flexitanks have a fine construction, undergo strict quality checks and are the most trusted in the industry for wine transportation.

Get in touch with us call: +91 8221-229400

The international companies in order to be more competitive should come out with best ideas to cut down their cost with every approach. Thus, it is important for the companies to be unbiased for all possible solutions which might include the logistics needs as well. Most of the companies out there are always looking for various unconventional ways to save money with their shipments. For instance, in case a company is shipping non-hazardous liquid product flexi-tank containers are an excellent option to consider.

The Flexi-tank was developed by the U.S. military which was used primarily to store and transport diesel fuel and water. It is a mass liquid storage unit, prepared with numerous layers of polyethylene, with an external layer of woven polypropylene. As international commerce expanded, logisticians took benefit of this technology to transport any non-risky liquids by simply placing them in a standard dry container. It essentially changes an ocean container to a safer, healthier and cost-effective alternative for shippers. Flexitanks are extensively favored for food-grade products such as fruit concentrates, edible oil, beverages and non-perilous chemical transportation due to their high effectiveness along with superior defense against contamination.

Top Benefits

Flexi-tank is a substitute to standard transportations such as railway, tank-containers, or drums, road tanks, IBCs and other way of transportation. When it comes to shipping bulk liquid there are quite a few factors that need to be taken care of. Business companies that ships bulk liquid experiences a lot of difficulties carrying out a shipment free of mistake. With the arrival of Flexi-tanks, it has certainly become a lot easier as it offers some great benefit which are as listed below.

• One can considerably reduce expenses of transportation. When compared with tank-container one will just pay for one way freight of the 20-feet container. There is no requirement to return container and pay for this.
• By using Flexi-tank as packaging for the cargo one can end up saving save not less than 30-40 % in comparison with cost of drums or other capacities.
• One can also save around 90 % of time for loading and unloading of the cargo.
• There is no need of cleaning the Flexi-tank after transportation as it is disposable.
• The material used in the manufacture of the flexi-tank is in fact cheaper than drums or other alternative packaging means.
• When compared to ISO tanks and drums, Flexitanks can carry increased volume of transportable liquid.
• The proportion of wastage is very low and there remains negligible or no residue after unloading.

All these phenomenal advantages of flexitanks clearly explain why Flexi-tanks are the most preferred option for shipping. Thus, it can be said that Flexi-tank is one of the most inventive and creative flexible containers that has been designed of late to carry liquid, fluid, foodstuffs and other such things. A flexitank can usually carry molasses, base oils, beer, wine, fruit juices, latex, glycerin, non-hazardous chemicals, egg products, water, oils, edible oils, bio-diesel, chemicals, non-dangerous pharmaceuticals as well as industrial products.

Get in touch with us call: +91 8221-229400