Archive for month: November, 2018

You are here: / / November
Types Of Thermal Liners For Flexitanks-Fluid Flexitanks Manufacturer in India

Types Of Thermal Liners For Flexitanks

/in /by

Thermal liners for Flexitanks act as a woven laminate to offer completely sealed off humidity and temperature-controlled environment for the cargoes that need warming prior to unloading. This liner is made utilizing WPP fabric and it comes with a polythene sheeting and aluminum foil as well. It is an outstanding option for container liners and defends the content inside by reflecting radiant energy.

Woven Polyethylene (Coated PE)

These liners are used for movement of free-flowing foodstuffs, chemicals, sugars or starches. Woven polyethylene is coated for dampness and contagion protection. Each liner is custom manufactured with numerous ports or spouts for mass loading and release chutes for unloading. The liner is intended for fast installation and will offer less worker exposure and quicker filling speeds than traditional bulk packaging. These are usually available in sizes ranging from 20ft to 53ft container.

Woven Polypropylene (Coated PP)

Liners are elastic plastic with outstanding chemical and wear resistance used in transport of agricultural cereal, heavy polymers, fertilizers or minerals. Coated PP can replace labor intensive 25kg or bulk bag transport. Better system than cartons or drums, these Woven Polypropylene are the best option available. The best thing about them is that they emit low carbon footprint and are very much recyclable. Options of utilizing steel, standard bars and fixing kit or the special strapping supports are the best thing about Woven Polypropylene.

Some of the most interesting feature of Coated PP include:

  • Full access cargo liner
  • Custom-built liners
  • Mailbox or Fishtail discharge liner
  • Zipped loaded box liner
  • Bulkhead with steel or no bars liner
  • Triangular bulkhead liner

There is no denying that flexitanks have become very well-liked over the years, particularly for the storage space and transportation of a variety of liquid bulk items. While container liners are used to keep the items inside the flexitank safe and free from contaminants, the thermal liners within can help to carry bulk items in a temperature-controlled environment. These liners also prevent contamination by creating an oxygen barrier and thus are excellent preferred in most of the industries.

For more information call: +91 2662 227 100

Preparing Heater Pads for Flexitanks

Preparing Heater Pads for Flexitanks

/in /by

Based on the kind of product being transport, and based on the atmospheric conditions, you can install Heater Pads for Flexitanks and maintain the desired temperature from the beginning of the load, until the discharge in the destination.

Listed below are some of the tips to follow in regards to heater pad preparation steps 

  • In the first tape, it is important to pull the tape off from the heater pad roll. However, it is important not to cut off.
  • In the next step, place the heater pad on the floor of the container close to the doors. Ensure that the inlet and outlet hose are at the rear of the container. Unroll the heater pad in the direction of the front of the container. The unit should be placed in the middle of the container and close enough to the doors to get access into the inlet and outlet hose. It is vital to ensure that the hose lays even on floor devoid of running up the container wall.  It is of utmost importance to avoid KINKS in the hose. Tie the ends of the hose down can assist.
  • Line up the inlet and outlet hose to the rear of the bulkhead panel. Cut two holes 1” x 1” in the base of the bulkhead panel to drag the inlet and outlet hose through. Refrain from stacking bulkhead panel on heater hose or heater pad.
  • Attach the inlet and outlet hoses of the heater pad to the hot water system (which is used at the discharge location).
  • Let the hot water travel until the temperature of the product has increased as per the requirement.

These are some of the vital steps that need to be followed in regards to heater pad preparation steps

Related: Installation Guide for Heater Pads for Flexitanks

The heater pads for flexitanks are used to make the atmospheric condition appropriate for the product being transported. Heater pads are a great finding and work to make sure the products are shipped in a safe and temperature controlled environment. The heater pad essentially has a steady HDP/Valuflex hose which ensures steam and hot water flow through liberally to heat the product inside.

For more information call: +91 2662 227 100